Kahr Handgun Forum banner

guide rod broke !

2178 Views 0 Replies 1 Participant Last post by  phil evans
at range, p380 digesting everything.
then could not get slide to retract.
much backward pressure-nothing,
gently tapped hard at back of grip while pushing slide down on corner of bench, slide slowly-slowly came out to full retraction.
tiny piece of metal fell out (1/8 long x 1/32 wide).
took slide off and found the guide rod had a - waining moon shaped piece of metal - removed from the round portion of part #6.
called kahr, sending new part #6.
purchased 8/24, around 300 of 9 brands down range.
snappiest were herter's, hungarian, blazer.
ANYBODY ELSE HAVE THIS EXPERIENCE?
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top