Kahr Handgun Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
371 Posts
or clean the gun, lube the stainless slide rails up and they re-install and thenjust sit there and rack the slide about 500 times. this will take of fany high spots on the polymer guide rails. Once the slide is on the gun, it shouldmake no contact witht he polymer rails. All those rails do is #1 give you a guide to re-install the slide , #2 adds alittle upper frame strength also. Another reason why kahr recommends 200 rounds down range to, This shooting will smooth things out real fast.Where the slide actually touches the polymer rails due to possably to much polymer in that area, willsoon be shaved/worn down by the action of the slide. Racking will do about the same thing.

yourgun is OK, just go out and shoot it like you stole it..
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top